Portable Mounting Systems

Telescopic Masts, Custom Made in the UK by Total Mast Solutions

 Portable Mounting Systems

Portable Mast Mounting Options – A Brief Selection

NEW QUICK RELEASE/INTEGRAL TRIPOD –QPOD
Our strongest and most versatile tripod. 2 zinc plated versions are available- QPOD S has a retracted height of 1130mm and a 1100mm adjustable leg radius (weight 13kg) suitable for masts up to 12 metres or QPOD L has a retracted height of 1480mm and a 1500mm adjustable leg radius (weight 18kg) for masts up to 20 metres and some of our keyed mast range. 3 x Telescopic legs, a telescopic central foot and upper clamp receiver are included. Easy to deploy on uneven ground. Has 2 carabiners to attach weight bags. Integral or quick release from mast function. Quick release wheels are available.

Please remember to order a QPOD to mast adapter clamp.
A super strong Stainless Steel version of QPOD L and S is now available


QPOD ACCESSORIES TRIPOD STEP SHELF

Constructed of aluminium tread plate, the step shelf simply attaches to the tripod for holding equipment, a step to access clamps or to install equipment on taller retracted masts.
Available for
QPOD S           QPOD L
Weight 2.5kg  Weight 5.5kg


QUICK RELEASE TRIPOD WHEEL BASE
1. Specifi cally designed to enable quick and easy movement of masts and can be used with masts with quick release integral tripod.
Weight 3kg
420mm x 440mm x 170mm
Quick release double grab handle
available
2. Optional Pneumatic wheel base
also available
Weight 4kg
520mm x 600mm x 300mm


CPOD TRIPODZINC PLATED
New compact design with feet that stow away in the tripod arms and a new central fourth leg for extra stability. Strong steel zinc plated construction, allows deployment on uneven ground. Suitable for masts up to 115mmØ. 1m tripod feet are also available.
Strong and lightweight.
Weight – 21kg.Length – 1.5m.

ADJUSTABLE DRIVE ON MAST MOUNT – ZINC PLATED
The fully adjustable drive on vehicle mounting system is ideal when the tripod mount is not convenient. Simply, drive on using front or rear wheel. The mounting post can be adjusted forward, backwards and side to side to allow level deployment of the mast and stowed flat when not in use.
Weight – 12kg
Size – 880 x 270 x 215mm.
Upper support system available for increased stability.
Soft ground spreader board.
900mm x 300mm x 18mm
Padded drive on bag available.

ADJUSTABLE TOW HITCH MOUNT – ZINC PLATED
1. Available for masts up to 115mmØ. The universal vehicle mounting system attaches to the tow hitch of any vehicle. It is fully adjustable for vertical deployment of the mast when parked on uneven ground.

Weight – 11kg Size – 875 x 270 x 220mm.
Upper support system available for increased stability.

Padded tow hitch mount bag available.
2. Universal model available for a tow ball.

QPOD / DRIVE ON OR TOW HITCH COMBO – ZINC PLATED

If you intend to use a mast in a public place, we would strongly advise our tripod / drive on or tow hitch combo. The tripod occupies a large area and can be a trip hazard. Using a drive on or tow hitch mast mount will occupy a much smaller area.
Supplied with one quick release mast mounting post that fi ts both systems.
Combined weight – 32kg.

ADJUSTABLE BOLT DOWN MAST MOUNT – ZINC PLATED

It can be easily fi xed to trailers or onto a suitable concrete base. For bigger/heavier masts extra lateral steel supports are available. Fabricated from strong steel box section and of rugged design, the entire assembly is zinc coated and the pivot is quick release or can be anti tamper (locked into position).
The mast can be stowed horizontally for transport.
Weight – 12kg
Size: 450 x 450 x 870mm.

LAMP POST/STREET FURNITURE MAST MOUNT

The mast mounting bracket that fi ts to all diameters and shapes of lamp posts, etc. Commonly used for traffi c analysis, air quality and noise monitoring. Strong steel construction – fully zinc coated.
Suitable for masts up to 4ӯ and up to 17m extended.
Weight – 5kg.
780mm x 220mm x 160mm

MOUNTING POSTS & WALL MOUNTING BRACKETS

Numerous wall mounting brackets are available and can come with spacers to allow masts to be mounted away from the wall to avoid overhanging soffi ts & guttering. The standard distance from a wall is 215 mm (8.5” in the UK) other sizes can be ordered– zinc plated. Weight – 5kg.

Also Available…
GALVANISED BOX SECTION STEEL MOUNTING POSTS

These can be concreted into position then the mast is mounted on quick release
brackets for rapid deployment.
Many sizes available depending on the mast size.

MOUNTING CLAMPS

A large range of upper and lower mounting clamps are available for all diameter masts for easy installation to walls, vehicles, ISO containers, roof racks etc.

101mm Quick Release Wall Mount Bracket 
 101mm Lower Mast Mounting Bracket.
Quick release or fixed versions available.

ROOF RACK CLAMPS

Useful for transporting a mast on your roof rack. The clamps are quick release and sold in pairs. A mast head protection cover
should be ordered with this item to protect the mast in transport.  101mm  roof clamps.

GRAB HANDLE FOR MASTS

These rubber handles make moving the mast around much easier, available to fit brackets on mast sizes 66mm, 80mm and 101mm Ø.